EXAM DUMPS HPE6-A85 ZIP - REAL HPE6-A85 EXAMS

Exam Dumps HPE6-A85 Zip - Real HPE6-A85 Exams

Exam Dumps HPE6-A85 Zip - Real HPE6-A85 Exams

Blog Article

Tags: Exam Dumps HPE6-A85 Zip, Real HPE6-A85 Exams, Valid HPE6-A85 Test Pdf, Test HPE6-A85 Practice, Certified HPE6-A85 Questions

Candidates can reach out to the Exam-Killer support staff anytime. The Exam-Killer help desk is the place to go if you have any questions or problems. Time management is crucial to passing the HP HPE6-A85 exam. Candidates may prepare for the HP HPE6-A85 Exam with the help of Exam-Killer desktop-based HPE6-A85 practice exam software, web-based HPE6-A85 practice tests and HP HPE6-A85 pdf questions.

HP HPE6-A85 certification exam is a multiple-choice exam conducted online. HPE6-A85 exam consists of 60 questions, and the candidate has 90 minutes to complete it. HPE6-A85 exam is available in different languages, including English, Japanese, Simplified Chinese, and Spanish. HPE6-A85 exam fee varies depending on the country of the candidate, and the candidate can register for the exam on the HP website.

HP HPE6-A85 (Aruba Campus Access Associate) Exam is a certification exam designed to test the skills and knowledge of IT professionals in the area of Aruba campus access solutions. HPE6-A85 exam is an entry-level certification that is ideal for those who are new to the industry, as well as those who are looking to expand their knowledge and skills in the field. HPE6-A85 Exam covers a range of topics, including ArubaOS, basic wireless theory, and troubleshooting.

HP HPE6-A85 Exam consists of 60 multiple-choice questions, which must be completed within 90 minutes. HPE6-A85 exam is available in multiple languages, including English, Japanese, and Simplified Chinese. To pass the exam, candidates must score at least 65% on the exam. Upon passing the exam, candidates receive the Aruba Certified Mobility Associate (ACMA) certification, which is valid for three years.

>> Exam Dumps HPE6-A85 Zip <<

Real HPE6-A85 Exams | Valid HPE6-A85 Test Pdf

Clients always wish that they can get immediate use after they buy our HPE6-A85 Test Questions because their time to get prepared for the exam is limited. Our HPE6-A85 test torrent won’t let the client wait for too much time and the client will receive the mails in 5-10 minutes sent by our system. Then the client can log in and use our software to learn immediately. It saves the client’s time.

HP Aruba Campus Access Associate Exam Sample Questions (Q59-Q64):

NEW QUESTION # 59
What is the ideal Aruba access switch for a cost-effective connection to 200-380 clients, printers and APs per distribution rack?

  • A. Aruba CX 6400
  • B. Aruba CX 6200
  • C. Aruba CX 6300
  • D. Aruba CX 6000

Answer: C

Explanation:
The Aruba CX 6300 Series is an ideal access switch for medium to high-density client environments, offering a range of models that can accommodate various port densities and types. For a distribution rack supporting 200-380 clients, printers, and APs, the CX 6300 provides the necessary port density and performance capabilities, including high-speed uplinks, support for Class 4 PoE (PoE+), and stacking capabilities. This series is cost-effective and designed for enterprises requiring reliable connectivity and consistent performance. The other options, such as the CX 6400, CX 6200, and CX 6000, may either be over-specified and more expensive (CX 6400), not offer the necessary port density (CX 6200), or not exist in the product line (CX 6000).


NEW QUESTION # 60
What is indicated by a flashing amber global status indicator LED on an Aruba CX6200M?

  • A. The switch has a recoverable fault.
  • B. The firmware image is corrupt.
  • C. The switch is booting the firmware image.
  • D. Self-test is in progress.

Answer: A

Explanation:
A flashing amber global status indicator LED on an Aruba CX6200M switch typically indicates that the switch has encountered a fault, but it is recoverable. This LED behavior serves as an alert to the network administrator that an issue needs to be addressed, but it does not necessarily mean that the switch is inoperable.


NEW QUESTION # 61
The noise floor measures 000000001 milliwatts, and the receiver's signal strength is -65dBm. What is the Signal to Noise Ratio?

  • A. 35 dBm
  • B. 45 dBm
  • C. 15 dBm
  • D. 25 dBm

Answer: D

Explanation:
Explanation
The signal to noise ratio (SNR) is a measure that compares the level of a desired signal to the level of background noise. SNR is defined as the ratio of signal power to the noise power, often expressed in decibels (dB). A high SNR means that the signal is clear and easy to detect or interpret, while a low SNR means that the signal is corrupted or obscured by noise and may be difficult to distinguish or recover3. To calculate the SNR in dB, we can use the following formula:
SNR (dB) = Signal power (dBm) - Noise power (dBm)
In this question, we are given that the noise floor measures -90 dBm (0.000000001 milliwatts) and the receiver's signal strength is -65 dBm (0.000316 milliwatts). Therefore, we can plug these values into the formula and get:
SNR (dB) = -65 dBm - (-90 dBm) SNR (dB) = -65 dBm + 90 dBm SNR (dB) = 25 dBm Therefore, the correct answer is that the SNR is 25 dBm.
References: 3 https://en.wikipedia.org/wiki/Signal-to-noise_ratio


NEW QUESTION # 62
You put in a few show commands on switches EDGE1 and CORE1 to attempt to gather information to troubleshoot the issue Use the show command output images to determine the reason for the EDGE1 uplink being down

  • A. Spanning-Tree block state is preventing the Core uplink from having connectivity to the edge
  • B. The physical interfaces are not members of the correct LAG.
  • C. LACP is not configured on the Core uplink
  • D. The Core is connected to the incorrect physical interlaces

Answer: C

Explanation:
Explanation
LACP is a protocol that allows multiple physical links to be aggregated into a single logical link for increased bandwidth and redundancy. LACP must be configured on both ends of the link for it to work properly. In this case, EDGE1 has LACP configured on its uplink port-channel 1, but CORE1 does not have LACP configured on its corresponding port-channel 1. This causes a mismatch and prevents the link from coming up.
References:https://www.arubanetworks.com/techdocs/ArubaOS_86_Web_Help/Content/arubaos-solutions/1-ove


NEW QUESTION # 63
A network administrator with existing IAP-315 access points is interested in Aruba Central and needs to know which license is required for specific features Please match the required license per feature (Matches may be used more than once.)

Answer:

Explanation:

Explanation
a) Alerts on config changes via email - Foundation b) Group-based firmware compliance - Foundation c) Heat maps of deployed APs - Advanced d) Live upgrades of an AOS10 cluster - Advanced According to the Aruba Central Licensing Guide1, the Foundation License provides basic device management features such as configuration, monitoring, alerts, reports, firmware management, etc. The Advanced License provides additional features such as AI insights, WLAN services, NetConductor Fabric, heat maps, live upgrades, etc.
https://www.arubanetworks.com/techdocs/central/2.5.3/content/pdfs/licensing-guide.pdf


NEW QUESTION # 64
......

Get the test HPE6-A85 certification is not achieved overnight, we need to invest a lot of time and energy to review, and the review process is less a week or two, more than a month or two, or even half a year, so HPE6-A85 exam questions are one of the biggest advantage is that it is the most effective tools for saving time for users. Users do not need to spend too much time on HPE6-A85 Questions torrent, only need to use their time pieces for efficient learning, the cost is about 20 to 30 hours, users can easily master the test key and difficulties of questions and answers of HPE6-A85 prep guide.

Real HPE6-A85 Exams: https://www.exam-killer.com/HPE6-A85-valid-questions.html

Report this page